Most One Leg Multi problems come from five causes: trading is not allowed (Long/Short, scheduler, drawdown), the gap never reaches Min Open Gap, a spread filter blocks entries or exits, the broker rejects or slips orders, or SessionControl closes positions after an order mismatch. Find your symptom below; the strategy log usually shows which one it is.
One Leg Multi does not open trades
| Cause |
How to recognise it |
What to do |
| Long / Short not allowed |
Quotes and gap move, no BUY or SELL lines in the log. |
Tick Allow Open Long and/or Short in Trade Control. |
| Scheduler forbids opening |
Entries stop at fixed times. |
Check the scheduler linked in Trade Control or set it to none. |
| Settings changed but not applied |
The strategy behaves as before the change. |
Press Stop and Start after changing settings. |
| Gap never reaches Min Open Gap |
Peaks on the Gap chart stay below the level. |
Compare the chart with Min Open Gap. Check Digits: with the wrong value every level in points is 10 times too large or too small. |
| Constant offset between providers |
The gap of a feed stays far from zero even when the market is quiet. |
Turn on Use Auto Shift or set a manual shift. |
| Spread filter |
No entries while spreads are wide. |
Check Use Max Spread Fast, Use Max Av Spread Fast and the “For Open” slow spread filters; turn them off for a test. |
| Drawdown reached |
“Drawdown reached” in the log. |
Review the losses before trading on. New entries resume only after Stop and Start. See SessionControl. |
| A position is already open |
No new trade until the current one closes. |
Build 590.1 holds one position at a time. |
| The previous gap has not closed |
After a trade, a new peak in the same direction is ignored. |
Expected: the next entry in the same direction waits until the gap has returned below 0 on every fast feed. |
| A provider sends no quotes |
No “logged in.” line, or the slow broker’s price stops changing. |
Nothing is traded until every provider has sent a quote; if the slow broker sends nothing for 15 seconds, signals are ignored and the program resubscribes. Check the connection and the symbol name. |
| Strategy initialization error |
“Strategy initialization error.” in the log at start. |
The strategy is loaded from the Westernpips server at start: check the internet connection and, if the log asks for it, update Private 7. |
Orders fail or fill badly
| Symptom |
Likely cause |
What to do |
| OPEN FAILED / CLOSE FAILED |
Wrong symbol name, fill policy not supported for this symbol, lot below the minimum or not a multiple of the lot step, trading disabled, not enough margin. |
Read the Error text in the line. Check Symbol and Fill Policy in Edit Provider, Volume, MinVolume and VolumeStep. |
| Large negative slippage on entries |
The broker’s price moves before the fill: latency, last look or a slow server. |
Move the VPS closer to the broker, raise Min Open Gap, use TakeProfitMode FromEntry. Compare entry and exit slippage in the Orders tab. |
| Slow execution (tens or hundreds of ms) |
VPS far from the broker, overloaded connection or broker delay. |
Check the Execution value in OPEN OK lines. Execution Control is not applied by One Leg Multi in build 590.1, so changing it does not pause trading. |
| Requotes on an instant-execution account |
No allowed price deviation. |
Set Open slippage and Close slippage in Edit Provider. Read about requotes. |
Unexpected closes and losses
| Symptom |
Likely cause |
What to do |
| All positions closed, “Emergency” in the log |
The number of orders on the symbol at the broker differs from what the strategy tracks: a manual trade, another strategy or EA on the same symbol, or an order closed directly at the broker. |
Use the symbol of the slow account for this tab only. Turn off UseEmergencyClose only if you understand the risk. Trading resumes automatically 60 seconds after all orders are closed. |
| Stop loss triggered late |
A “For Close” spread filter postponed every exit while the spread was wide. |
Turn off Use Max Spread Slow For Close and Use Max Av Spread Slow For Close, or raise Max Spread Slow(pt). |
| Take profit hit with little profit |
TakeProfitMode FromSignal: entry slippage shortens the distance to TP. |
Switch TakeProfitMode to FromEntry or raise TakeProfit. See the exit example. |
| Many stop losses |
Min Open Gap too low for this broker, or slippage takes most of the gap. |
Raise Min Open Gap, check slippage in the Orders tab, test the change in the BackTester first. |
| Trades closed very quickly by Close Gap |
Min Close Gap 0 closes as soon as any fast feed crosses the broker’s price back. |
Raise Min Close Gap or set CloseGapStartDelayMs. |
| Lot size changes by itself |
UseDynamicVolume is on: the lot follows account equity. |
Expected. Turn it off to trade a fixed Volume. |
BackTester problems
| Symptom |
Likely cause |
What to do |
| The backtest makes no trades |
Ticks Path not set for a provider, files from different recordings, wrong Digits, or Long/Short not ticked. |
Select a .ticks file for every provider from the same recording time (0 = slow, 1, 2, … = fast, 10 = signal) and check Digits and Allow Open. |
| Backtest much better than live trading |
Execution delay and slippage of the slow provider left at 0. |
Enter the execution time, slippage and zero-slippage share measured on live trades in the slow provider, not in a fast one. See first setup, stage 3 and 4. |
| No MultiBacktest item for One Leg Multi |
Parameter optimization is not available for One Leg Multi in build 590.1. |
Use Backtest OneLegMulti and change parameters one at a time. |
The broker complains or restricts the account
- Very short holding times: trades closed within a second are the first thing a broker’s risk team notices. One Leg Multi has no minimum holding time setting; a larger TakeProfit, Close Gap with CloseGapStartDelayMs or a trailing stop usually keeps positions open longer.
- Rules first: read the client agreement before trading. If the broker does not allow latency arbitrage, choose another broker: see brokers that allow arbitrage and toxic flow.
Still stuck? Contact Westernpips support 24/7 on Telegram @westernpips and attach a copy of the strategy log and the .xml file of the recorded session.
Related One Leg Multi guides
Risk warning. Trading Forex, CFDs and cryptocurrencies with leverage carries a high risk of losing money. Results depend on the broker, its execution and rules, latency and settings; no profit is guaranteed. Test on a demo account first. Read the full risk warning.